{"id":1107,"date":"2026-05-18T16:17:19","date_gmt":"2026-05-18T16:17:19","guid":{"rendered":"https:\/\/glossworkssaskatchewan.com\/index.php\/2026\/05\/18\/7-mistakes-homeowners-make-with-their-garage-floors-before-winter-hits\/"},"modified":"2026-05-18T16:17:19","modified_gmt":"2026-05-18T16:17:19","slug":"7-mistakes-homeowners-make-with-their-garage-floors-before-winter-hits","status":"publish","type":"post","link":"https:\/\/glossworkssaskatchewan.com\/index.php\/2026\/05\/18\/7-mistakes-homeowners-make-with-their-garage-floors-before-winter-hits\/","title":{"rendered":"7 Mistakes Homeowners Make with Their Garage Floors (Before Winter Hits)"},"content":{"rendered":"<\/p>\n

We\u2019ve all been there. That first morning in late October or early November when you look out the window and see a light dusting of white on the lawn. In Regina, we know that "light dusting" is just the opening act for six months of ice, slush, and the dreaded road salt. <\/p>\n

While we\u2019re busy digging out the parkas and swapping over the winter tires, there\u2019s one part of the home that often gets overlooked until it\u2019s too late: the garage floor. Your garage floor is the frontline of defense against the Saskatchewan winter. Every time you drive into your stall, your vehicle drops pounds of salt-laden slush onto that concrete.<\/p>\n

At GR Flooring Inc<\/a>, we see the aftermath every spring: pitting, peeling, and deep cracks that could have been avoided. We want to help you get ahead of the freeze. If you\u2019re thinking about your garage, here are the seven most common mistakes homeowners make before the snow flies and how you can avoid them.<\/p>\n

1. Falling for the "Big Box" DIY Epoxy Kit<\/h2>\n

It\u2019s tempting, we get it. You\u2019re at the hardware store, you see a colorful box promising a "show-quality garage floor" for a couple of hundred bucks, and you think, \u201cI can do that this weekend.\u201d<\/em> <\/p>\n

The reality? Most DIY epoxy kits are water-based and contain a very low percentage of solids. They are designed to be easy to apply, not necessarily to last. In our climate, these kits often fail within the first year. You\u2019ve likely seen it: the "hot tire pick-up" where the coating literally sticks to your tires and peels off the floor. <\/p>\n

When we work with GlossWorks<\/a>, we use professional-grade polyaspartic coatings. Unlike DIY epoxy, polyaspartic is flexible and bonds deep into the concrete. It doesn\u2019t just sit on top; it becomes part of the floor. That\u2019s the kind of protection you need when the temperature swings from -30\u00b0C to +5\u00b0C in a single week.<\/p>\n

2. Ignoring "Minor" Cracks<\/h2>\n

We often hear, "It\u2019s just a small hairline crack; it\u2019s been there for years." In the summer, those cracks are mostly an eyesore. In a Regina winter, they are a structural hazard.<\/p>\n

Water is a powerful force. When snow melts off your truck, that salty water finds its way into those "minor" cracks. When the temperature drops overnight, that water freezes and expands. This "freeze-thaw cycle" acts like a slow-motion jackhammer, widening the crack and eventually leading to "spalling": where the top layer of your concrete begins to flake and pop off. <\/p>\n

Before winter hits, those cracks need to be professionally filled and sealed. Part of our process at GR Flooring Inc involves mechanical grinding to open those cracks up so we can fill them with a high-strength polyurea filler that actually prevents water from getting back in.<\/p>\n

\"Professional<\/p>\n

3. Skipping the Moisture Test<\/h2>\n

This is one of the biggest "invisible" mistakes. Concrete might look bone-dry on the surface, but it acts like a giant sponge. It can hold a significant amount of moisture deep within the slab. <\/p>\n

If you apply a coating over concrete that has a high moisture vapor transmission rate, that moisture will eventually try to push its way out. This leads to bubbles, blisters, and delamination (the coating peeling off). <\/p>\n

Before we ever put down a drop of product, we believe in doing the prep work the right way. We check for moisture to ensure the environment is perfect for a long-term bond. If you\u2019re just "winging it" on a Saturday afternoon, you\u2019re gambling with the longevity of your floor.<\/p>\n

4. Thinking a Power Wash is "Enough Prep"<\/h2>\n

If you take one thing away from this post, let it be this: Preparation is 90% of the job.<\/strong> <\/p>\n

A common mistake is thinking that a good scrub with some soap or a quick hit with a pressure washer is enough to prep the floor. It isn't. Concrete needs to be mechanically "profiled." This means using a heavy-duty floor grinder with diamond blades to remove the top layer of "laitance" (that dusty, weak top layer of concrete) and open the pores.<\/p>\n

Without grinding, the coating is just sitting on top of dirt, oils, and old sealers. It\u2019s like trying to paint a piece of glass: it might look okay for a minute, but it\u2019ll slide right off. We make sure the surface feels like 80-grit sandpaper before we even think about the base coat.<\/p>\n

5. Underestimating Regina\u2019s Road Salt<\/h2>\n

We love our clean roads, but the brine and salt used by the city are absolute kryptonite for bare concrete. Salt is "hygroscopic," meaning it attracts and holds water. When salt gets into the pores of your concrete, it keeps the concrete more saturated than it would be otherwise, which accelerates the freeze-thaw damage we mentioned earlier.<\/p>\n

Moreover, salt can cause a chemical reaction that weakens the paste holding the concrete together. Many homeowners think they can just "rinse it off" once a month. But by the time you rinse it, the salt has already done its work. A non-porous polyaspartic coating creates a total barrier. The salt just sits on top, unable to penetrate, making it easy to squeegee out the door.<\/p>\n

\"Water<\/p>\n

6. The "I\u2019ll Fix It in the Spring" Mindset<\/h2>\n

It\u2019s easy to put things off when the schedule gets busy. But waiting until spring to address a failing garage floor means you\u2019re giving the winter elements five or six months to do permanent damage. <\/p>\n

Once concrete begins to deeply pit and salt-scar, the restoration process becomes much more intensive (and expensive). Dealing with it in the fall: while the ground is still relatively warm and the air is dry: is the sweet spot. It ensures your "foundation" is protected before the harshest conditions arrive.<\/p>\n

If you already have a floor that\u2019s seen better days, don't forget that GlossWorks<\/a> also offers incredible restoration services for more than just garage floors: they are experts at bringing life back to terrazzo, marble, and granite surfaces too.<\/p>\n

7. Skipping the Quality Check<\/h2>\n

Most "one-day" floor companies are in and out before the dust even settles. They slap it down, take the check, and you never see them again. <\/p>\n

At GR Flooring Inc, we do things a bit differently. We\u2019ve found that the best results come from a patient, thorough process. This is why we emphasize our 2nd and 3rd-day quality checks.<\/strong> <\/p>\n